Safety Precautions When Using Cutting Discs


2018-12-14-18:08:40

With the development of the abrasives industry, the cutting sheets on the market are now more and more widely used. Among the many types of cutting sheets, the 105*1.2*16 cutting disc is more commonly used, but users are increasing in use. Its safety factor, some details must be paid attention to, today’s professional production of China cut off disc manufacturers Aurora abrasives to give you a summary of what details need to pay attention.

  1. Before starting to use the cutting piece, please use it for one minute and then use it. When replacing the cutting piece of new variety, please idle for 3 minutes before using it;
  2. Confirm that the cutting piece has no missing edges, no cracks, etc. before use;
  3. Never use the side of the cutting piece;
  4. Use an angle grinder with a safety cover and a cutting machine with a safety cover;
  5. When using, be sure to fix the cut material firmly;
  6. Be sure to use the correct flange. No enhancement: 1/3 or more; there is enhancement: 1/4 or more;
  7. Users must wear protective glasses, masks, earplugs, gloves, dust-proof clothes, etc., and take protective measures;
  8. Store the cutting piece in a place without direct sunlight or moisture, and place it horizontally;
  9. The maximum use cycle speed of the cutting piece is used below the maximum number of revolutions;
  10. If the inner diameter of the cutting piece is small and the equipment does not match, please do not change the hole diameter of the grinding wheel.

The operator only pays attention to the details that should be paid attention to when the above-mentioned cutting piece is operated, in order to increase the layer of protection for its own safety. I hope the above points can help everyone better use the cutting piece.

abrasive raw materials