Home » News » How To Improve The Life Of The Grinding Wheel
How To Improve The Life Of The Grinding Wheel
Grinding wheels occupy a very important position in the abrasive industry. Henan Aurora Abrasive Tool Co., Ltd. is a manufacturer and supplier of grinding wheels for professional research and production. We have a variety of grinding wheels, such as 4.5 inches grinding wheel, high quality 9” grinding wheel and so on. Next, let’s take a look.
First, buy a grinding wheel
We should not rush to buy, run the market more, first understand the market conditions. Then choose a good manufacturer. We buy the grinding wheel and don’t say anything else, the quality should be well protected. There must also be certain guarantees in terms of after-sales and service. We can’t buy those low-cost ones because they are cheap. After that, you will find yourself losing money. So it is a key step when buying.
Second, the maintenance of the grinder
The pulley of the grinder should be timed to add lubricating oil so that the grinding wheel can ensure smoothness during operation and avoid blockage. The amount added is one-third or two-thirds of the bearing cavity, and the grinder can be added for a half year or so to add an appropriate amount of grease. At the same time, we must pay attention to the screws. Each screw has a considerable effect on the machine. One less may not have a big problem, but a few fewer ones will not cause serious trouble. The damage to the shredder is small and the injury is large.
Third, the operation of grinding wheel grinding work
The operation of the long life grinding wheel can be roughly divided into frontal operation and side operation. When using different grinding wheels for sanding, it should be selected from the side or the front. If you are a novice, you need to arrange a professional to guide you. You can’t operate it alone, and it will cause damage to people and machines. Many newcomers are used to the frontal operation when they first use it. They think that they can use their strength. In fact, this is not the correct approach. Although the strength is increased, the danger is raised. We must follow the guidance of professional people. Do not operate blindly. This is a dangerous job and cannot be careless. And we can’t use too much force when working, it is too safe, it is not safe.