Cutting Speed Analysis Of Cutting Disc


2019-02-20-19:00:33

The cutting disc is now used more and more widely in our production, and its role is becoming more and more important, so the user sometimes not only looks at the performance of the cutting disc when selecting, but also the cutting speed of the cutting disc is very fancy. So how much do you know about the cutting speed of the cutting disc? Today, Henan Aurora Abrasive Tool Co., LTD uses 4 1/2 super thin cutting disc as an example to analyze the cutting speed of cutting disc.

4 1/2 super thin cutting disc are mounted on cutting machines for cutting a variety of materials. The cutting disc requires a specific analysis of the specific problem. The cutting speed of the cutting disc is the feeding speed of the sawed stone. Its size affects the sawing rate, the force of the saw blade and the heat dissipation of the sawing area. Its value should be based on The nature of the sawed stone is determined.

Generally speaking, sawing softer stones, such as marble, can increase the feed speed appropriately. If the feed speed is too low, it is more conducive to improving the sawing rate. The sawing of the fine-grained, relatively homogeneous granite can increase the feed speed appropriately. If the feed speed is too low, the diamond blade is easily soothed. However, when cutting granite with coarse grain structure and uneven hardness, the feed speed should be reduced, otherwise, the vibration of the saw blade will cause the diamond to break and reduce the sawing rate. The cutting speed of sawing granite is generally selected within the range of 9m to 12m/min.

After understanding the factors affecting the cutting speed of the cutting disc, you can choose the cutting device that is more suitable for you.

abrasive grinding header