Home » news » Cutting Pieces Can Be Classified According To Materials
Cutting Pieces Can Be Classified According To Materials
The industry of the machining industry often uses a variety of China cutting disc for metal to meet the needs of different work processes. With the rapid development of the cutting sheet industry, the types of cutting sheets are becoming more and more complicated. However, no matter how it is developed, the current cutting sheets are mainly classified into two types: fiber resin cutting sheets and diamond cutting sheets according to materials:
1. Resin cutting sheet is made of resin as a bonding agent, combined with a variety of materials, especially for alloy steel, stainless steel, and other difficult cutting materials, cutting performance is particularly significant. Dry and wet cutting methods make the cutting precision more stable. At the same time, the choice of material and hardness of the cutting piece can greatly improve your cutting efficiency and save your production cost.
2. A diamond cutting piece is a cutting tool widely used in the processing of hard and brittle materials such as stone, concrete, prefabricated board, new and old road, ceramics, etc. The diamond cutting piece is mainly composed of two parts; the base body and the cutter head. The base body is sticky. The main support part of the knitting head.
A detailed understanding of the types of cutting discs can provide valuable advice for purchasing cutting discs.
It is not difficult to find that the staff who operate the cutting machine for a long time sometimes encounters the situation that the vibration of the cutting handle is severe and the cutting efficiency is degraded when the cutting blade is running at a high speed, and this situation is generally caused by the imbalance of the cutting piece. Caused by. If the cutting machine with severe vibration often damages the material and causes material waste, there will be certain safety hazards. Therefore, when installing the low price disc for metal, it is important to adjust the balance!
After the cutting piece is mounted on the flange, the flange is placed on the mandrel and placed on the gimbal rail. If it is unbalanced, the heavier part of the cutting piece will always turn to the bottom, move the balance block position inside the ring tip of the flange, balance the center of the cutting piece, and repeat until the cutting piece is free on the guide rail. The position can be still, and the cutting piece reaches a static balance. When installing a new cutting piece, the cutting piece is statically balanced twice. After a static balance, install the grinder and trim the shape of the cutting piece with a diamond pen, then remove the cutting piece and perform a static balance before installation.
The cutting piece is only balanced to ensure product quality and protection of the machine and machine.
Henan Aurora Abrasive Tool Co.,Ltd.
No.55, Lotus Street, High Tech Zone, Zhengzhou city,
Henan Province, China